DOC: HUMMER H3 DRIVELINE/AXLE REAR DRIVE AXLE


AXLE PRELOAD AND BACKLASH SPECIFICATIONS Axle Preload and Backlash Specifications DIFFERENTIAL ADJUSTMENT SHIM SPECIFICATIONS Differential Adjustment Shims Specifications Application Specification Metric English Backlash 0.08-0.25 mm 0.003-0.010 in Backlash, Preferred 0.13-0.18 mm 0.005-0.007 in Pinion and Differential Case Bearing Preload, New Bearings 2.8-4.5 N.m 25-40 lb in Pinion and Differential Case Bearing Preload, Used Bearings 1.7-3.4 N.m 15-30 lb in Pinion Bearing Preload, New Bearings 1.7-3.4 N.m 15-30 lb in Pinion Bearing Preload, Used Bearings 1.1-2.3 N.m 10-20 lb in... Document/File: .pdf, filesize: n/a. Filetype: pdf. Filename: hummer-h3-drivelineaxle-rear-drive-axle. Title: Hummer H3 Driveline/Axle Rear Drive Axle. 2014.

 

File Info:

  • Filesize: N/A
  • Source: schwarttzy_dot_com
  •   Date Archived: 2017-05-28
  •   Author: N/A
 
 
 
 
 

Related Files:

 

  REAR AXLE ASSEMBLY CONSTRUCTION AND OPERATION

... THE REAR AXLE ASSEMBLY IS USED ON REAR-WHEEL DRIVE VEHICLES. THIS ASSEMBLY IS THE FINAL LEG OF THE DRIVE TRAIN. IT IS OFTEN CALLED THE FINAL DRIVE OR REAR END. THE REAR AXLE ASSEMBLY IS OFTEN MISTAKENLY CALLED THE DIFFERENTIAL. THE DIFFERENTIAL IS ONLY PART OF THE REAR AXLE ASSEMBLY. ...
  rear-axle-assembly-construction-and-operation     PDF     2017-05-28  
 

 

  DIFFERENTIAL AND REAR DRIVE AXLE DIAGNOSIS AND REPAIR

... - DIAGNOSE COMMON DIFFERENTIAL AND REAR DRIVE - AXLE PROBLEMS. - EXPLAIN THE BASIC SERVICE AND REPAIR OF A DIFFERENTIAL ASSEMBLY. - REMOVE AND REPLACE AXLES, AXLE BEARINGS, AND SEALS. - DESCRIBE LIMITED-SLIP DIFFERENTIAL TESTING AN SERVICE. - ADJUST RING AND PINION GEARS. - CHECK AND REPLACE REAR AXLE LUBRICANT. - CITE SAFETY RULES AND PRACTICE SAFE WORK HABITS ...
  differential-and-rear-drive-axle-diagnosis-and-repair     PDF     2017-05-28  
 

 

  CURRIE REAR AXLE INSTALLATION INSTRUCTIONS

... INSPECT ALL PARTS TO MAKE SURE YOU HAVE EVERYTHING NECESSARY TO PUT A COMPLETE REAREND TOGETHER. YOU SHOULD HAVE THE HOUSING, AND IT SHOULD HAVE 10 CENTER SECTION STUDS PRESSED INTO IT. YOU SHOULD HAVE 2 AXLE SHAFTS, 2 AXLE BEARINGS, 2 AXLE SEALS, 2 AXLE BEARING RACES (THE BEARINGS, RACES, AND SEALS COME STUCK TOGETHER AS ONE UNIT), 10 WHEEL STUDS PRESSED IN THE AXLE FACES, AND 2 GOLD AXLE BEARING RETAINER PLATES. ...
  currie-rear-axle-installation-instructions     PDF     2017-05-28  
 

 

  MODEL A FORD REAR AXLE ASSEMBLY RESTORATION

... THE DIFFERENTIAL CRADLE TOOL IS USED TO REMOVE AND REPLACE THE REAR AXLE AS SEMBLY FROM THE VEHICLE. IT IS ALSO USED AS A PLATFORM FOR DISASSEMBLY AND FOR FINAL ASSEMBLY. CARE SHOULD BE EXERCISED WHEN REMOVING THE REAR AXLE ASSEMBLY FROM A MODEL A. THE REAR SPRING CAN BE LETHAL. USE A PROPER SPRING SPREADER AND DISCONNECT AND LEAVE THE SPRING IN THE VEHICLE. ...
  model-a-ford-rear-axle-assembly-restoration     PDF     2017-05-28  
 

 

  REAR AXLE STEERING FOR HEAVY TRUCKS

... VOLVO S STEER SYSTEM FOR REAR AXLE STEERING PROVIDES TOO SMALL MAXIMUM STEERING ANGLE FOR OPTIMAL FUNCTION ON TRIDEM TRUCKS , TRUCKS WITH THREE REAR AXLES . THE CONTROL SYSTEM FOR THE REAR AXLE STEERING IS A "STEER BY WIRE" AND THE REASON FOR THE RESTRICTION IN STEERING ANGLE IS A STRICT SAFETY APPROACH IN THE EVENT THAT THE CONTROL SYSTEM FAILS OR SENDS OUT FALSE CONTROL SIGNALS. THERE IS AN AFTERMARKET SERVICE KIT ALLOWING GREATER STEERING ANGLES THAT CAN BE RETROFITTED ON VOLVO TRUCKS. ...
  rear-axle-steering-for-heavy-trucks     PDF     2017-05-28  
 

 

  FRONT & REAR AXLES FOR AGRICULTURAL TRACTORS

... FRONT AND REAR AXLE DESIGNED FOR PREMIUM NICHE AGRICULTURAL TRACTORS, SUITABLE FOR ROAD TRANSFER, AGRICULTURAL, NON AGRICULTURAL AND FORESTRY TASKS AT HIGH SPEED (60 - 80 KPH). • STEERING DRIVE AXLE WITH DOUBLE REDUCTION AND HYPOID GEAR • SINGLE STAGE FINAL PLANETARY REDUCTION • 100% HYDRAULIC DIFFERENTIAL LOCK • OUTBOARD CALIPER BRAKE • MAXIMUM STEERING ANGLE 45° • STEERING CYLINDER MOUNTED ON DIFFERENTIAL CARRIER TO AVOID EXTERNAL DAMAGE ...
  front-rear-axles-for-agricultural-tractors     PDF     2017-05-28  
 

 

  LEANING TRIKES USING REAR AXLE PEDAL CRANK MECHANISM

... TILTING DELTA TRIKES WITH A REAR AXLE MADE FROM STANDARD CYCLE CRANKS WERE INVENTED BY MR. VI VUONG, WHO CALLS THEM "ILEAN TRIKES". HE HAS DEVELOPED SEVERAL SUCH VERSIONS WITH FAMILY AND FRIENDS AND MAINLY BUILDS FROM RECYCLED MATERIALS. THE TRIKES CAN BE BUILT IN MANY DIFFERENT WAYS. ...
  leaning-trikes-using-rear-axle-pedal-crank-mechanism     PDF     2017-05-28  
 

 

  TRUCK DIFFERENTIAL AND REAR AXLE MODELING

... PHYSICAL MODELING OF THE DRIVELINE IS CRUCIAL IN MANY AREAS WITHIN THE COMMERCIAL VEHICLE INDUSTRIES. TO HAVE AN ACCURATE MODEL HELPS THE UNDERSTANDING OF PHYSICAL PHENOMENA AND IS IMPORTANT WHEN PERFORMING COMPUTATIONAL TESTS AND WHEN DESIGNING, FOR EXAMPLE, TRACTION CONTROLLERS. ...
  truck-differential-and-rear-axle-modeling     PDF     2017-05-28  
 

 

  REAR AXLE OPERATION

... THE DIFFERENTIAL IS THE THING THAT WORKS BOTH DRIVE AXLES AT THE SAME TIME, BUT LETS THEM ROTATE AT DIFFERENT SPEEDS SO THAT THE CAR CAN MAKE TURNS. WHEN A CAR MAKES A TURN, THE OUTER WHEEL HAS TO TURN FASTER THAN THE INNER WHEEL, DUE TO THE DIFFERENCE IN THE LENGTH OF THE PATHS THEY TAKE. ...
  rear-axle-operation     PDF     2017-05-28  
 

 

  SERVICING REAR AXLES ON FORD 9N/2N TRACTORS

... SO YOU'VE HEARD THAT THESE TRACTORS HAVE POOR BRAKES. WELL, THAT'S NOT TRUE, THEY HAVE A POOR AXLE SEAL DESIGN THAT WHEN FAILED ALLOWS AXLE OIL INTO THE BRAKES. MANY TRACTORS WERE NEVER WORKED ON SO LONG AS THEY RAN AND THE BRAKES WERE OFTEN NEGLECTED. WHEN PROPERLY SERVICED, THE 9N HAS VERY EFFECTIVE BRAKES. ...
  servicing-rear-axles-on-ford-9n2n-tractors     PDF     2017-05-28